MTD: REPAIRS & REBUILDS

It’s simple and sobering- when your machine is down, you are losing money…

MTD understands how vital a machine tool is to your business- the machine tool is the profit center of every manufacturer. It is extremely important to keep these profit centers running smoothly and safely to maximize the return on investment.

Our factory trained Service Technicians will thoroughly inspect your machine tool so together we can plan for and prevent failures. In the event of a failure -focus shifts to immediate recovery of the machine to minimize down time and loss of revenue. Comprehensive systems inspections and repair will allow your machine tool to endure the intense levels of stress during production.

Table and ways off and ready to get repaired. #cnc #cncowners #machinetools #millingmachines #toolroom #manufacturingengineering #factorytools #factory #industrialmaintenance
Tearing into the dumped mill. A lot more is bent than originally thought. Table off, screws out, motor out. Onward. #cnc #manufacturing #cncowners #machinetools #fieldservice #fieldservicemechanic #cncservice #factorytools #millingmachine #millingmachines #milling
Simple does not mean easy. Bringing the heat in 2025. #cnc #cncmachining #machinist #cncowners #practicalmachinist #simple #simplenoteasy #simplicity #manufacturing
This horizontal machining center was leaking 55 gallons of hydraulic oil every couple days. Full hydraulic hose upgrade and replacement. Time consuming but definitely worth the money. #cnc #cncowners #cncowner #machinist #machinistlife #machinistporn #machinistsofinstagram #practicalmachinist #haas #mazak #doosan #mori #moriseiki #toyoda #hydraulics
The tip over knocked the lead screw out of the mount. #cnc #cncowners #machinists #machinistsofinstagram #instamachinist #practicalmachinist #toolroom #manufacturing
Customer knocked this machine over moving it. “Send it over and we will fix it”. Surveying the damage…..#CNC #cncowners #cncowner #toolroom #oops #manufacturing #toolroom #machinist #machinistlife #machinistporn #instamachinist #practicalmachinist
Customer delivered another tool room mill rebuild. Doesn’t matter how they get to us. We can take them from you or come get them. You can a full rebuild for about 40% of the cost of a new machine and they will run like new. It’s a great option for all types of machines including tool room machines, grinders, horizontal machining centers, boring mills, etc. Reach out with any questions on rebuilds or if you want us to take a look at a potential rebuild. #cnc #cncmachining #cncowners #machining #machinist #machinistsofinstagram #instamachinist #toolroom #grinders #grinding #grindingmachine
Welding on new rails for the sheet sorter. This is a massive machine that’s can move tons of steel very quickly. Everything needs to work in uniform with maximum rigidity and stability. Feel free to reach out for information on how we can help you with your industrial equipment. #manufacturing #steelmill #steel #distributor #service #welding #serviceprovider #fieldservice #machinists #practicalmachinist
Getting there on this steel sheet sorter and bundler. Starting to test and adjust. This was a complete over haul from top to bottom. Many upgrades to stronger parts and better fabrication for a longer life. Reach out if you have any questions on your industrial equipment. www.machinetdinc.com #cnc #cncmachining #testing #factory #steel #rebuild #industrialmaintenance #machinist #machinistporn #machinery #heavymachinery
Onsite welding by MTD Tech Eric. Repairing industrial equipment that comprises of many different systems requires a unique and thoughtful approach. Being able to get done what is required is one of MTDs strengths. Feel free to reach out for service o
Onsite welding by MTD Tech Eric. Repairing industrial equipment that comprises of many different systems requires a unique and thoughtful approach. Being able to get done what is required is one of MTDs strengths. Feel free to reach out for service or rebuild options on your equipment. #cnc #cncowners #machinetools #industrialservices #welding #service #fanuc #siemens #servomotor
Table and ways off and ready to get repaired. #cnc #cncowners #machinetools #millingmachines #toolroom #manufacturingengineering #factorytools #factory #industrialmaintenance
Tearing into the dumped mill. A lot more is bent than originally thought. Table off, screws out, motor out. Onward. #cnc #manufacturing #cncowners #machinetools #fieldservice #fieldservicemechanic #cncservice #factorytools #millingmachine #millingmac
Simple does not mean easy. Bringing the heat in 2025. #cnc #cncmachining #machinist #cncowners #practicalmachinist #simple #simplenoteasy #simplicity #manufacturing
This horizontal machining center was leaking 55 gallons of hydraulic oil every couple days. Full hydraulic hose upgrade and replacement. Time consuming but definitely worth the money. #cnc #cncowners #cncowner #machinist #machinistlife #machinistporn
The tip over knocked the lead screw out of the mount. #cnc #cncowners #machinists #machinistsofinstagram #instamachinist #practicalmachinist #toolroom #manufacturing
Customer knocked this machine over moving it. “Send it over and we will fix it”. Surveying the damage…..#CNC #cncowners #cncowner #toolroom #oops #manufacturing #toolroom #machinist #machinistlife #machinistporn #instamachinist #pr
Customer delivered another tool room mill rebuild. Doesn’t matter how they get to us. We can take them from you or come get them. You can a full rebuild for about 40% of the cost of a new machine and they will run like new. It’s a great o
Welding on new rails for the sheet sorter. This is a massive machine that’s can move tons of steel very quickly. Everything needs to work in uniform with maximum rigidity and stability. Feel free to reach out for information on how we can help
Getting there on this steel sheet sorter and bundler. Starting to test and adjust. This was a complete over haul from top to bottom. Many upgrades to stronger parts and better fabrication for a longer life. Reach out if you have any questions on your
Onsite welding by MTD Tech Eric. Repairing industrial equipment that comprises of many different systems requires a unique and thoughtful approach. Being able to get done what is required is one of MTDs strengths. Feel free to reach out for service o
5146-MMS-1502131767000-attachment1-20170807_112046.jpg
29792093_1676715552385884_8632208410992209145_n.jpg
4809-MMS-1521747780000-attachment1-20180322_123618.jpg

MTD Service Technicians have years of experience working on an extensive variety of CNC/ Machine Tools including

  • Bridgeport

  • Chevalier

  • Cincinnati

  • Clausing Industrial

  • Daewoo/Doosan

  • DMG

  • Fadal

  • Fryer

  • Haas

  • Hardinge

  • Hurco

  • Hwacheon

  • Hyundai Wia

  • Kitamura

  • Makino

  • Mazak

  • Miyano

  • Mori Seiki

  • Neway CNC

  • Okuma

  • Romi

  • Toyoda

  • TOS Trade

  • Winema

Our ability to service and repair systems include but not limited to:

 

  • Turning Center Repair

  • Machining Center Repair

  • Horizontal Machining Center Repair

  • Surface Grinder Repair

  • Machine Rebuilding

  • Safety interlocks, guarding, and emergency stop security

  • Control repair and operator station repair

  • Fanuc Control Repair

  • Siemens Control Repair

  • CNC Motor Repair

  • CNC Drive Repair

  • Lubrication Systems Repair

  • Hydraulic Systems Repair

  • Pneumatic Systems Repair

  • Coolant Pump Repair

  • High Pressure System

  • Tool Changer Repair

  • Ballscrew repair and / or rebuild

  • Waycover repair

  • Lathe Spindle Repair

 

  • Mill Spindle Repair

  • Thrust bearing inspection and thrust bearing replacement

  • Drawbar inspection and replacement

  • Tool Changer inspection and repair

  • Turret Repair

  • Turret Rebuilds

  • Turret Alignments

  • Hydraulic Chuck Actuators

  • Drawtube repair and replacement

  • Clamp Cylinder Repair

  • Hydraulic Chuck Repair and Rebuilds

  • Linear rail inspection and replacement

  • Electrical System Error Diagnosis

  • Machine Installation Services

  • Machine Relocation Services

  • Gear-box repair

  • Rotary table repair

  • Indexer repair

  • Alignment Inspection: Backlash and repeatability, table squareness, table rise and fall, spindle run out, spindle taper inspection, spindle heat, spindle vibration, drawbar pressure

MTD SERVICE PRICING

Resized_20190226_143942_1107.jpg

SERVICE CALLS

LABOR- $150/hr (3 hr minimum)

TRAVEL TIME + MILEAGE- ($95/hr + $.85/mile)

Resized952019022195103246953306.jpg

REPAIR SERVICES

LABOR- $150/hr (3 hr minimum)

TRAVEL TIME + MILEAGE- ($95/hr + $.85/mile)

REPAIR PARTS- Billed as needed

20190208_135337.jpg

REBUILD SERVICES

LABOR: $150/hr (3 hr minimum)

TRAVEL TIME + MILEAGE- ($95/hr + $.85/mile)

REBUILD PARTS- Billed as needed

REMOVAL + RE-INSTALLATION- Billed as needed

Machine Tool Diagnostics will send estimates with parts pricing and availability for customer approval prior to anything being ordered/purchased for repairs or rebuilds.

If you would like more information about Repairs & Rebuilds, please fill out the service request form below.

For immediate assistance, please call our office @ 630-229-6220